Magnetic Balance 2000A Hall Effect Current Transducer

Dettagli:

Termini di pagamento e spedizione:

Quantità di ordine minimo:	100
Imballaggi particolari:	Imballaggio originale
Tempi di consegna:	1-12 settimane
Termini di pagamento:	T/T

Contatto

Descrizione di prodotto dettagliata

Rated che misura IPN corrente (A):	2000	IP del campo di misura (A):	0~±3700
Gira il rapporto:	1:5000	Tensione di alimentazione elettrica VC (v):	× DI DC± (15~24) (1±10%) V
Uscita stimata ISN (mA) di misura:	400mA	Consumo corrente IC (@±24V) del lato secondario:	≤35mA+
L'isolamento resiste alla tensione:	12kVrms/50Hz/1min	ΔL di linearità (@IPN, TA=25℃):	≤±0.1%
Evidenziare:	2000A Hall Effect Current Transducer , Magnetic Balance Hall Effect Current Transducer

NT2000C-S/SP1( NACL.2000B1-S4 ) current sensor

Product Details

product manual

The magnetic balance Hall current sensor is suitable for accurate measurement of AC, DC and pulsating current isolation. The primary side and the secondary side are completely insulated during measurement.

product advantages	Applications	Reference standard
High precision	AC inverter AC	EN50178 EN50155
Good linearity	Battery powered
Low temperature drift	Converter/Inverter
Broadband	UPS/SVG
Quick response

Main electrical parameters
Rated measuring current IPN (A)	2000
Measuring range IP (A)	0～±3700
Turns ratio	1:5000
Power supply voltage VC (V)	DC ± (15 ~ 24) × (1 ± 10%) V
Rated measurement output ISN (mA)	400mA
Measuring resistance RM (Ω)
70℃ 85℃ @ ± 15V, ± 2000A: 0Ω ~ 7.5Ω @ ± 15V, ± 2400A: 0Ω ~ 4Ω @ ± 24V, ± 2000A: 3Ω ~ 27.5Ω @ ± 24V, ± 3700A: 0Ω ~ 3Ω
Secondary side current consumption IC (@±24V)	≤35mA+
Isolation withstand voltage	12kVrms/50Hz/1min

Accuracy-dynamic parameters
Basic error δi (@IPN,TA=25℃)	≤±0.4%
Linearity δL (@IPN,TA=25℃)	≤±0.1%
Zero output current IO (@IP=0, TA = 25℃)	≤ ± 0.5mA
Zero temperature drift IOT	≤ ± 0.8mA (-50 ℃ ~ + 85)
Response time	≤1µS
di/dt accuracy	＞100A/us
Frequency bandwidth BW	DC..100kHz

General data
Working temperature Ta	-40℃~+85℃
Storage temperature Ts	-45℃~+90℃
weight	≤1700g

Magnetic Balance 2000A Hall Effect Current Transducer 0

Mechanical characteristics
No tolerance	±1 mm
Sensor installation method one (recommended)	4 hole ø6.5mm 4 M6 steel screws
Recommended torque	4.5 N·m
Busbar size (recommended)	Ø60.5mm
Secondary side electrical connection	(RVVP3×16/0.15)

Remarks

1. When the measured current direction is consistent with the direction marked on the sensor, the sensor output ISN is positive.
2. The secondary side connection line of the product is preferably a shielded line. The shielding layer is close to the product end and the connection line can be connected to the case, and the negative power supply or power supply 0V.
3. The verticality requirements for the mounting screw holes of the power sensor: it is required to be level 8 or above (or below 0.06) in the national standard.
4. The flatness requirements for the installation surface of the power sensor:
(a). The flatness of the large plane installation is national standard 11 or above (or the flatness is less than 0.25mm);
(b). The flatness of the installation surface is designed with small round bosses It is required to reach the national standard level 12 or above (or the plane fluctuation is less than 0.5mm);
5. No tolerance ±1mm is noted;

Prodotto Tag:

Persona di contatto: Miss. Elaine

Telefono: +86 18150151931

Fax: 86-592-2611505

Altri prodotti

Deriva di temperatura di UPS SVG Hall Current Sensor With Low

Alta precisione: CA dell'invertitore di CA

Buone linearità: a pile

Deriva di bassa temperatura: Convertitore/invertitore

A banda larga: UPS/SVG

Invertitore 50A Hall Effect Current Transducer di CA

Rated che misura IPN corrente (A): 50

IP del campo di misura (A): 0~±70

Gira il rapporto: 1:1000

Tensione di alimentazione elettrica VC (v): +/-12V~+/-15V (+/--5%)

7kV Hall Current Sensor EN50178 con la deriva di bassa temperatura

Rated che misura IPN corrente: 1000A

Campo di misura IPM: ±2000A

Tensione di alimentazione elettrica VC: × DI DC± (15~24) (1±5%) V

Consumo corrente IC (@±24V): ≤±30mA+ISN

GB/T 25119 13.4kV 2400A Hall Effect Current Transducer

Rated che misura IPN corrente: 1000A

Campo di misura IPM: ±2400A

Tensione di alimentazione elettrica VC: × DI DC± (15~24) (1±5%) V

Consumo corrente IC (@±24V): ≤±30mA+ISN

1us risposta 1000A Hall Effect Current Sensor EN50178

Rated che misura IPN corrente: 1000A

Campo di misura IPM: ±2100A

Tensione di alimentazione elettrica VC: × DI DC± (15~24) (1±10%) V

Consumo corrente IC (@±24V): ≤±35mA+ISN